Concrete Contractor in Millbrook, AL - Driveways and Slabs Built on Packed Ground
Keystone Montgomery Concrete Company is a concrete contractor based in Montgomery, building driveways, patios, slabs and walkways for homes in Millbrook, AL. I come out to look at the ground myself, and our crew does the pour.
Concrete work for Millbrook homes and lots
Millbrook sits a few miles up the road from Montgomery, right next to Prattville, and most of the calls we get here are for driveways, patios and front walks. The houses run from subdivision homes with two-car driveways and attached garages to older places with carports, worn walkways and bigger yards, plus some lots past the city limits with a long drive and a shop or barn out back. We do the same kind of work up the road in Wetumpka.
Your price here mostly comes down to the size of the slab, how much base work the ground needs and whether old concrete has to come out first. The schedule turns on whether the city needs a permit for your job and on getting a dry day to pour, and I'll give you your own number after I look at the ground and measure. On a lot of the newer lots, the dirt was pushed around when the subdivision was graded, so we dig out the soft spots and pack the subgrade, the ground the slab sits on, before any concrete goes down.
What we pour around Millbrook
Most Millbrook driveway calls start with a cracked or sunken slab, so we tear it out, dig to firm ground, pack the base and pour new.
Plenty of back yards in the newer subdivisions here slope toward the house. We set the patio to fall away from your walls so rain runs into the yard.
For homeowners here who want a patio or front walk that looks like stone or brick, we press the pattern into the concrete while it's still soft.
A front walk heaved up by an old tree root on an established lot is a trip waiting to happen. We cut out the bad sections and pour new ones level.
Garage slabs take a car's weight every day and catch whatever drips off it, so we pour them with rebar, steel set inside that holds cracks tight.
Colored concrete and borders let a plain patio or walk match the brick on a lot of Millbrook houses, and we'll talk through which finishes hold up underfoot.
On sloped Millbrook lots, a concrete retaining wall holds the yard back from a driveway or patio. We drain the back of it so water can't build up behind.
Shops, barns and outbuildings on the bigger lots around Millbrook need a flat, hard floor. I learned on barn pads, and we pour these the same way.
Around backyard pools here, the deck has to shed water away from the pool, so we slope it and give it a textured finish for wet feet.
Crumbling front steps on older houses are usually a footing problem underneath. We pour new ones on a solid footing, with every step the same height.
New houses, additions and garages in Millbrook start with the slab. We dig, pack and form it to the plans, and plan the pour around any inspections.
Before a foundation goes in on a Millbrook lot, I walk the ground to see where it's soft and where water sits. Then we lay out, dig and pour to fit the building.
Small property owners here, from shops to rentals, need parking that carries cars and drains. We grade it so water runs off and pour heavier where cars turn.
Carports and porches on older Millbrook houses rest on footings, so we dig past the loose topsoil to firm ground before we pour them.
When a slab or foundation here has dropped because the dirt under it settled, we find out why first, then raise it back toward level.
We saw-cut old concrete to widen a driveway or run a drain line, and we cut control joints, the grooves that give a slab a place to crack.
What Millbrook ground asks of a slab
We've been in business since 2023, we're fully licensed and insured, and here's what that looks like on a Millbrook job. Satisfaction guaranteed.
Base dug out and packed
We dig out soft dirt and pack the base, because a slab stays flat as long as the ground under it does.
Water sent away from the house
Before we set forms, we check where rain runs on your lot and slope the slab so it drains away from the house.
Joints marked before the pour
I'll mark where the joints go before the pour, and we cut them early so cracks tend to follow those lines.
The owner on site
I look at your ground before I write the estimate, and I'm on site running our crew while it goes in.
Straight answers, no upsell
I'll tell you what your job needs and what it doesn't, so you know what you're paying for before we start.
Millbrook concrete questions we hear
How do I find out if my concrete driveway needs a permit in Millbrook?
Check with the City of Millbrook Building Department, which issues permits for residential and commercial work across the city and its police jurisdiction. If your job needs one, the city wants the application filled out and submitted by a state licensed general contractor, and there's a fee on permitted work, which City Hall at 334-285-6428 can quote from its fee schedule. Before we start, we check with the department and pull any permit your job needs.
What building codes apply to concrete work in Millbrook, AL?
Millbrook's building official enforces the International Building Code and International Residential Code the city has adopted, along with the plumbing, mechanical and other codes that go with them. For a new home or an addition, the process runs through a plan review, a building inspection and a Certificate of Occupancy, and the Building Department schedules the inspections. When a slab or footing is part of that work, we plan the pour around those inspections.
Does a concrete contractor need a business license to work in Millbrook?
Yes, the City of Millbrook requires a business license before anyone does or even asks for business in the city or its police jurisdiction. It's a fair question to put to any contractor who knocks on your door or leaves a flyer.
When does a concrete contractor need an Alabama home builder license?
Alabama law requires a license from the Home Builders Licensure Board, renewed every year, for paid work building, repairing or improving a home someone else lives in when the cost is more than $10,000. That covers houses up to three floors with up to four units. The law leaves you free to do the work on your own home yourself, so the license question comes up when you hire someone for a bigger job.
How much does a new concrete driveway cost in Millbrook?
The price comes down to how big the slab is, how much digging and base work your ground needs, whether an old driveway has to be broken out and hauled off, and the finish you pick. A broom finish, the light texture swept in for grip, costs less than stamped or colored concrete, and a permit fee adds to any job that needs one. If the budget's tight, I'd keep the money in the base and go plain on top, because no finish fixes a slab that sinks. I'll give you your own number after I look at the ground and measure.
What causes a concrete driveway to crack and sink in Millbrook?
Most cracking and sinking starts under the slab, when the base was raked level instead of dug out and packed, so the dirt settles and the concrete goes with it. Water running under the edges and control joints cut late or skipped make it worse. We pack the base, slope for drainage, add rebar where the load calls for it, and keep the new slab damp and off-limits while it cures, the slow hardening that gives concrete its strength.
Outside Millbrook? Give us a call
We work in the cities around Montgomery, not just the ones with their own page here. If you don't see yours, call (334) 215-4466 and ask.
Get a Millbrook concrete estimate
Tell us what you're dealing with through the form, or call (334) 215-4466, so I know what to look for when I come out.